Günther Unlustig 🍄

Peter Lustig’s unlustiger verschollener Sohn mit weirden Interessen und Gadsen.

🇩🇪 DE/EN 🇬🇧

<Explaination for anyone not knowing obscure German media>

Peter Lustig used to be the moderator in an old German kids science and nature series called “Löwenzahn” (Dandelion) who shaped our generation.
He also shaped my childhood, and I want to honour him.

My real name also isn’t “Günther”, it’s just a reference to “Olaf, Olaf, Olaf, Günther” from Spongebob: The Movie, because I wanted it to sound like a real name and it makes conversations easier.

  • 2 Posts
  • 1 Comment
Joined 2 years ago
Cake day: May 18th, 2024
  • Günther Unlustig 🍄@slrpnk.netto3DPrinting@lemmy.world•sharing experience with greentec (extrudr) / warping helpEnglish
    3·
    1 month ago

    I have some experience, but with the GreenTec PRO. I don’t know if you have the same, or if it’s another thing.

    The GTP is a composite material, meaning it’s made of at least two different polymers. IIRC it’s PLA (or something very similar) and Lignin, which gives it the heat and mechanical resistance.

    I had the experience that it behaves quite the opposite of ABS or other warping prone materials. Usually, slower cooling (enclosure, high bed temp, low fan speed) means less warping.

    But GTP was different. I had way less warping when I increased the cooling fan (max) and decreased the bed temp to around 50°C.
    It should solidify as soon as it comes out of the nozzle in my experience.