Did I just brick my SAS drive?

I was trying to make a pool with the other 5 drives and this one kept giving errors. As a completer beginner I turned to gpt…

What can I do? Is that drive bricked for good?

Don’t clown on me, I understand my mistake in running shell scripts from Ai…

EMPTY DRIVES NO DATA

The initial error was:

Edit: sde and SDA are the same drive, name just changed for some reason And also I know it was 100% my fault and preventable 😞

**Edit: ** from LM22, output of sudo sg_format -vv /dev/sda (broken link)

BIG EDIT:

For people that can help (btw, thx a lot), some more relevant info:

Exact drive model: SEAGATE ST4000NM0023 XMGG

HBA model and firmware: lspci | grep -i raid 00:17.0 RAID bus controller: Intel Corporation SATA Controller [RAID mode] Its an LSI card Bought it here

Kernel version / distro: I was using Truenas when I formatted it. Now trouble shooting on other PC got (6.8.0-38-generic), Linux Mint 22

Whether the controller supports DIF/DIX (T10 PI): output of lspci -vv (broken link)

Whether other identical drives still work in the same slot/cable: yes all the other 5 drives worked when i set up a RAIDZ2 and a couple of them are exact same model of HDD

COMMANDS This is what I got for each command: (broken link)

Solved by y0din! Thank you soo much!

Thanks for all the help 😁

  • squaresinger@lemmy.worldEnglish
    1·
    2 months ago

    I had a problem with Fedora 42, where the performance of my games would be fine one day and abysmal another day. Couldn’t find a pattern. I googled a ton, tried to debug myself, asked on reddit, stackexchange, the fedora forum and lemmy. I only got answers like “Works fine on my machine, noob” and “I have that problem too”. It only affected games running in proton on heroic, everything else was fine.

    After about a year of on-and-off debugging and asking around, I swallowed my pride and asked ChatGPT.

    First answer from that thing was correct: I had run dnf update without doing a flatpak update right afterwards. Turns out, flatpak has its own copy of Nvidia drivers and if the system driver is updated without the flatpak copy being updated, it falls back to software rendering. So the performance was crap until I did flatpak update the next time, and broke again when I ran dnf update.

    I still haven’t found that in any documentation so far.

    AI is crap more often than not, but it does at least try to help and sometimes it actually does.

    Look in this thread here. Is there even a single answer that tries to help OP, or is every single answer here just dumb snark?